1/4″ Female Coupler
Original price was: $35.00.$30.00Current price is: $30.00.Brass 1/4″ Female Coupler
Double O-Ring
Showing all 66 results

Brass 1/4″ Female Coupler
Double O-Ring

Brass 1/4″ Male Coupler
Stainless Steel Nipple

SteamVac Stainless Steel Crimp Ends (Unlike standard industry mild steel, NO MORE RUSTING!!)


*EXTRA DELIVERY FEES MAY APPLY TO NORTHERN TERRITORY & WESTERN AUSTRALIA
To Replace 3 stage vacuum motors has same vacuum power
XWFH95 Vortex Typical Motor Technic Parameter:
| Motor Type | XWFH9530-220-1200 |
| Rating Voltage(V) | 220 |
| Rating Frequency(Hz) | 50 |
| Rating Input Power(W) | 1200 |
| Maximal Airflow(M3/min) | 2.85 |
| Maximal Suction(Kpa) | 28 |
| Maximal Air Power(W) | 420 |
| Maximal Efficiency(%) | 34% |
| Noise(IM)(dBA) | ≤96 |

SteamVac Stainless Steel Crimp Ends (Unlike standard industry mild steel, NO MORE RUSTING!!)


This is an affordable truck mount that offers the quality components and engineering of a more expensive unit. With the objective of a smaller footprint in mind, the Steamvac BOSS 590 Truck Mount will out-perform its rivals above and beyond your expectations. With the re-engineered Hot Vapour Heat Exchanger and the power of a 25 HP Kholer V-Twin engine, Backed buy a 3 year warranty you will get more for your dollar!
Running a 4000psi seamless stainless steel heat exchange coil with a 4-1 burst rate meaning that unlike any imported brand, the BOSS 590 does not bypass high pressure away from the heat exchanger so you can clean on high pressure and maintain a high level of heat. Another major advantage in the engineering of the BOSS 650 is the fact that it does not dump a single drop of water back to the waste tank which means you are using much less water to do the same job therefore being better for the environment and your pocket. With less moving parts, no need for exhaust diverters or solenoids, the BOSS 590 is belt driven for reliability and ease of maintenance.
Steamvac BOSS Truck Mounts will save you money with our innovative design. We believe that you will save up to 60% on your maintenance costs compared to imported brands.Comes with a Easy slider so the truck mount pulls out from your van for easy maintenance. Locally sourced parts and a full back-up and support network means you will be working sooner, rather than sitting in a repair center waiting room or waiting for parts to be freighted from oversee.
Do yourself a Favour, before you buy anything else make sure you see what the BOSS 590 can do for you!
| Truckmount: | 200 Ltr Waste Tank: | |
|---|---|---|
| Length: | 905 mm | 800 mm |
| Width: | 550 mm | 400 mm |
| Height: | 965 mm | 925 mm |
| Weight: | 290 kg |
ENQUIRE NOW



Caster Wheel Plate


Dump Valve
1.5 ” Valterra Waste Valve
Valterra Products, Waste Valve with Plastic Handle
Stainless steel shaft.
All handles are threaded for easy replacement.
The waste valves are made of tough ABS plastic.
Seals are made of high-quality Santoprene for chemical resistance and maximum durability.




G-Vac Hose


G-Vac Hose

The only Australian made heater for carpets and tiles Made by SteamVac Cleaning Systems


*EXTRA DELIVERY FEES MAY APPLY TO NORTHERN TERRITORY & WESTERN AUSTRALIA

*EXTRA DELIVERY FEES MAY APPLY TO NORTHERN TERRITORY & WESTERN AUSTRALIA
The Hydro-Force SX-12 is a high-performance rotary tile and grout cleaning tool engineered to blast through the toughest soil and grime. Featuring a 30cm cleaning path, this tool utilizes a high-speed rotating arm that operates between 700 and 2000 PSI, making it the premier choice for cleaning tile, grout, and natural stone. Its advanced design ensures that while the pressure blasts dirt away, the integrated vacuum ports provide immediate water recovery, leaving floors dry and clean in a single pass.
The SX-12 is a versatile hard surface rotary tool compatible with truck-mount systems, pressure washers, and high-pressure portable extractors. The unit features a high-grade, rebuildable ceramic swivel and a low-profile head, allowing it to reach under counters and tight spaces effortlessly. As a professional tile and grout cleaning tool, it is designed for maximum efficiency on both smooth concrete and uneven stone surfaces
The Hydro-Force SX-12 stands out with its lightweight, non-fatiguing operation. The unique airflow system and split vacuum design ensure even and complete water pick-up, whether paired with a portable unit or a powerful truck-mount. Equipped with a stiff nylon brush skirt, this industrial floor cleaner glides easily across the floor, reducing operator strain during long shifts. It is a rugged, professional rotary tool built for the demanding needs of restoration and commercial cleaning contractors across Australia.
The SX-12 is the ultimate industrial cleaning accessory for:

Low Water Float Switch
Low water float switch to shut off solution pump.
Suits Steamvac, Polivac, Razorback, Prochem, Whytes , Kanga and various other Portable Units

*EXTRA DELIVERY FEES MAY APPLY TO NORTHERN TERRITORY & WESTERN AUSTRALIA


*EXTRA DELIVERY FEES MAY APPLY TO NORTHERN TERRITORY & WESTERN AUSTRALIA








Presure Gauge Copper line

Presure Hose – Pump To Uloader

Pump- Solenoid Valve
Opens when pump is in operation for release of oil pressure
To stop oil leaking from pump when laying machine on back for transport

Relay – Brand Omron




The Sizzler is a 1000 psi inline pressure water heater that boosts heat from your portable. It operates on 10 amp power and is ideal to work inline with a portable unit for the cleaning of upholstery and other applications where heat can be lost through water solution lines.
It is fitted with a stainless steel inner heater coil rated at 3000 psi and an adjustable thermostat. Can run dry as water is separate to element Heat is adjustable from 0-120c. Comes with 1.5m connecting hose to portable
*EXTRA DELIVERY FEES MAY APPLY TO NORTHERN TERRITORY & WESTERN AUSTRALIA

Pneumatic solid Wheel

Stainless upholstery tool designed to reach and clean where others miss. Great for detailing cars as well as normal upholstery and stair cleaning. Can be used with pressures up to 400 PSI.

2 JET – LOW PROFILE WAND Stainless Steel
• 1.5” Diameter Tube, Double Bend
• 12” Head Width
• 62” Height
• Low Profile design to get under low
furniture – only 4” high at the head
• 2-jet nozzle position is at 45 deg.
angle to the carpet to lift dirt out
• Advanced control valve with ‘soft opening’ feature also fitted with Inline Filter
• Light weight – approx. 3.2kg
• Stress-free oval shaped aluminum grip
• Stainless steel solution tube
• Full flow vacuum extraction
The SteamVac range of wands are fitted with the comfortable triggers to let you work for longer with less strain. The light weight, low profile stainless steel wands size 12 inch.
*EXTRA DELIVERY FEES MAY APPLY TO NORTHERN TERRITORY & WESTERN AUSTRALIA

4 JET – LOW PROFILE WAND Stainless Steel
• 1.5” Diameter Tube, Double Bend
• 12” Head Width | 62” Height
• Low Profile for cleaning under low
furniture – only 3.6” high
• Angled nozzles to ‘lift dirt out’ of carpet
• Advanced control valve with ‘soft opening’ feature also fitted with Inline Filter
• 4-jet wand for even spray pattern
• All stainless steel
• Stress-free oval shaped aluminum grip
• Stainless steel solution tube
• Full flow vacuum extraction
The SteamVac range of wands are fitted with the comfortable triggers to let you work for longer with less strain. The light weight, low profile stainless steel wands size 12 inch. Inline filter on trigger. 4 x Stainless steel Jets 11001
*EXTRA DELIVERY FEES MAY APPLY TO NORTHERN TERRITORY & WESTERN AUSTRALIA


*EXTRA DELIVERY FEES MAY APPLY TO NORTHERN TERRITORY & WESTERN AUSTRALIA


*EXTRA DELIVERY FEES MAY APPLY TO NORTHERN TERRITORY & WESTERN AUSTRALIA
Vacuum Booster Outlet – OPTIONAL
| Vacuum Options: | 2 x 1200 Watt 2 Stage with genuine wet seal on bearings |
| Pump: | ltalian Triple piston ceramic plunger pump rated at 2500 psi |
| Working Pressure: | 0-1600psi |
| Drive Motor: | ltalian 2.5hp, 1.8kw fully enclosed induction motor |
| Heater: | 5AMP |
| Solution: | 40Lt |
| Waste: | 40Lt |
| Wheels: | 4 x Swivel Casters 2 x solid grey Pneumatic |
| Length: | 720mm |
| Width: | 620mm |
| Height: | 1000mm |
| Weight: | 63kg |
| Auto Fill: | Standard |
| Waste Pump: | Standard |
ENQUIRE NOW

Steamvac Dome
13.5 ” Dome
1.5″ Port
Includes Seal & Strap
(Can be ordered with 2″ Port)
Suits Steamvac models & Razorback. & Kanga


*EXTRA DELIVERY FEES MAY APPLY TO NORTHERN TERRITORY & WESTERN AUSTRALIA


*EXTRA DELIVERY FEES MAY APPLY TO NORTHERN TERRITORY & WESTERN AUSTRALIA
Included:

*EXTRA DELIVERY FEES MAY APPLY TO NORTHERN TERRITORY & WESTERN AUSTRALIA


*EXTRA DELIVERY FEES MAY APPLY TO NORTHERN TERRITORY & WESTERN AUSTRALIA


*EXTRA DELIVERY FEES MAY APPLY TO NORTHERN TERRITORY & WESTERN AUSTRALIA
Included:


*EXTRA DELIVERY FEES MAY APPLY TO NORTHERN TERRITORY & WESTERN AUSTRALIA

*EXTRA DELIVERY FEES MAY APPLY TO NORTHERN TERRITORY & WESTERN AUSTRALIA


*EXTRA DELIVERY FEES MAY APPLY TO NORTHERN TERRITORY & WESTERN AUSTRALIA


*EXTRA DELIVERY FEES MAY APPLY TO NORTHERN TERRITORY & WESTERN AUSTRALIA
The Booster is an added vacuum and air flow booster pack designed to work in conjunction with a portable machine. This means you can run longer lengths of vac hose to gain better access to your jobs,like 2 storey houses no taking machine up stairs or simply use it in conjunction with your current hose length to boost suction performance resulting in faster drying times.
Housing 2×1200 Watt 2 stage vac motors with a genuine wet seal on bearings, this unit will almost double the vacuum performance of any unit that includes a booster port as standard.
ENQUIRE NOW

*EXTRA DELIVERY FEES MAY APPLY TO NORTHERN TERRITORY & WESTERN AUSTRALIA
| Vacuum Options: | 2 x 1200 Watt 2 Stage with genuine wet seal on bearings |
| Pump: | Italian triple piston ceramic plunger pump rated at 2500 psi |
| Working Pressure: | 0-600psi |
| Drive Motor: | 1.5hp, 1.1kw fully enclosed induction motor |
| Heater: | 5AMP |
| Solution: | 40 Lt |
| Waste: | 50 Lt |
| Wheels: | 4 x Swivel Casters 2 x Pump Up Pneumatic |
| Length: | 720mm |
| Width: | 620mm |
| Height: | 1000mm |
| Weight: | 54kg |
| Auto Fill: | NA |
ENQUIRE NOW


*EXTRA DELIVERY FEES MAY APPLY TO NORTHERN TERRITORY & WESTERN AUSTRALIA
| Vacuum Options: | 2 x 1200 Watt 2 Stage with genuine wet seal on bearings |
| Pump: | Triple piston ceramic plunger pump rated at 2000 psi |
| Working Pressure: | 0-500psi |
| Drive Motor: | .55 kw fully enclosed induction motor |
| Heater: | 5AMP |
| Solution: | 55 Lt |
| Waste: | 55 Lt |
| Wheels: | 4 x Swivel Casters 2 x Pump Up Pneumatic |
| Length: | 720mm |
| Width: | 620mm |
| Height: | 1100mm |
| Weight: | 50kg |
| Auto Fill: | NA |
| Waste Pump: | NA |
ENQUIRE NOW



Vacuum Booster Flap


*EXTRA DELIVERY FEES MAY APPLY TO NORTHERN TERRITORY & WESTERN AUSTRALIA
Suits Steamvac, Polivac, Razorback, Prochem, Whytes , steamaster and various other Portable Units
XWF95 Series Motor Technic Parameter:
| Rating Voltage(V) | 240 |
| Rating Frequency(Hz) | 50 |
| Rating lnput Power(W) | 1200 |
| insulation Grade | Class A E B F |
| Spark Grade | 2 class |
| Vibration (mm/s) | 25 |
| Life(A pair of carbon brush) | 500 hour |
XWF95 Series Typical Motor Technic Parameter:
| Motor Type | XWF9530-240-1200 |
| Rating Voltage(V) | 240V |
| Rating Frequency(Hz) | 50Hz |
| Rating lnput Power(W) | 1200W |
| Maximal Airflow (M3/min) | 3.2 M3/min |
| Maximal Suction (Kpa) | 30 kpa |
| Maximal Air Power(W) | 450 (W) |
| Maximal Efficiency (%) Noise (1M) (dBA) |
30 96dB(A) |


Vacuum Motor Muffler


STEAMVAC VAPOURTECH upholstery tool designed to reach and clean where others miss. Great for detailing cars as well as normal upholstery and stair cleaning. Can be used with pressures up to 400 PSI. Totally enclosed for no over spray and no over wetting with quicker drying times than any other tool (Number 1 selling tool for 30 years)

Attach to bottom of extraction wands to glide over tile or stone. Also helps wand glide more smoothly over carpet.
to suit OUR WANDS

Attach to bottom of extraction wands to glide over tile or stone. Also helps wand glide more smoothly over carpet.
to suit OUR WANDS

Copyright © SteamVac | Terms & Conditions